Wood Carving Bits

D20 – 150 Grit Diamond Bur – 3/32″ Shank (Made In USA) Review

D20 – 150 Grit Diamond Bur – 3/32″ Shank (Made In USA) Feature

• 6.0mm Approximate Head Diameter, 0.7mm Approximate Thickness, 3/32″ Shank
• 150 Grit 100% Natural Diamond (Not Synthetic), U.S. Made – High Quality – Durable
• Great for grinding or carving all types of stone, glass, tile, wood, and more
• This small diamond disc is great for cutting small grooves, lines, or notches
• The 150 Grit cuts most types of material and reduces chipping and pitting

D20 – 150 Grit Diamond Bur – 3/32″ Shank (Made In USA) Overview

The D20 – 150 Grit is great for cutting small grooves, lines, or notches in all types of materials including stone, glass, tile, wood, and more… It works great for creating small carvings or jewelry. Use it to cut a groove into the side of a stone before wire wrapping. The approximated head diameter is 6.0mm and the disc is approximately 0.7mm thick. As with all Lasco Diamond Burs, the 150 Grit D20 is a high quality, durable, 100% Natural Diamond bur, and is made in the USA.

Check Price Now!

*** Product Information and Prices Stored: Aug 21, 2011 22:05:04

TR44 – 150 Grit Diamond Bur – 3/32″ Shank (Made In USA) Review

TR44 – 150 Grit Diamond Bur – 3/32″ Shank (Made In USA) Feature

• Rounded Taper – Approx Dimension: 10mm Head Length, Diameter: 3.8mm (Base), 2.8mm (Tip), 3/32″ Shank
• 150 Grit 100% Natural Diamond (Not Synthetic), U.S. Made – High Quality – Durable
• Great for grinding or carving all types of stone, glass, tile, wood, and more…
• Great for making marble or other stone sculptures and carvings.
• The 150 Grit cuts most types of material and reduces chipping and pitting.

TR44 – 150 Grit Diamond Bur – 3/32″ Shank (Made In USA) Overview

The 150 Grit TR44 (photo shown is 150 Grit) is a tapered diamond bur with a rounded end. The approximate head length is 10mm, the approximate head diameter at the base is 3.8mm, and the approximate head diameter at the tip is 2.8mm. This bur is great for grinding or carving all types of stone, glass, tile, wood and more… It works especially well for creating small carvings. This shape works especially well for blending areas on a carving or free form. The 150 Grit is intended to be used for cutting or grinding, and works best for roughing out your basic shape and doing your design work. The 150 Grit cuts most types of materials while reducing chipping and pitting of the material being cut. As with all Lasco Diamond Burs, the 150 Grit TR44 is a high quality, durable, 100% Natural Diamond bur, and is made in the USA. The TR44 is also available in 80 Grit, 150 Grit, 200 Grit, 400 Grit, and 600 Grit.

Check Price Now!

*** Product Information and Prices Stored: Aug 20, 2011 21:27:05

CarveWright N01 Woodworking System Review

CarveWright N01 Woodworking System Feature

• Unlimited design capabilities
• Easy to use
• Compact
• Point-and-click format
• Design elements ready to use

CarveWright N01 Woodworking System Overview

This revolutionary compact and powerful CNC woodcarving machine measures only 15″ x 18″ x 26″! The rising head and feed-through configuration accepts work pieces 14-1/2″ wide, 5″ high, and with proper support, nearly any desired length. Using the CarveWright woodworking system is as easy as 1-2-3. Design your project on the CarveWright Designer software (included). Choose from images in the CarveWright software library or import images from a source of your choosing. Upload the project to a special memory card and slide the card right into the CarveWright machine – no need to attach your computer to the machine. After inserting the memory card into the CarveWright , the onboard LCD display will guide you, step by step, through your project. CarveWright can be used to perform a variety of functions such as routing, cutting, carving and jointing and has a patented “Quick Change System” that allows the bits to be easily removed and replaced. In fact, CarveWright will automatically choose the correct bit for your job and measure your work piece.The intuitive and easy to use PC or Mac compatible software package contains simple toolbars that allow you to manipulate your design on a 3-dimensional representation of your work piece. Images can be “dragged and dropped” onto the work piece display, allowing you to combine images, add text, size and re-shape, or adjust the carving depth. You can even draw your design using 2D drawing capabilities. The CarveWright Woodworking System comes equipped with everything needed to get started. Includes one carving bit, one cutting bit, two 1/4″ bit adapters, vacuum bag, a bit removal tool, a CarveWright 0-45 degrees with programmer, CarveWright design software, users manual and a one year warranty. Note: Available in the continental United States only.

CarveWright N01 Woodworking System Specifications

The CarveWright woodcarving system gives power to your imagination.

You’ve Got Big Ideas. CarveWright Has the Technology to Make Them Happen.
Revolutionize your handicraft experience with the CarveWright computer-controlled carving system. Now you can design and create your own furniture, architectural flourishes, signs, and almost anything else you can imagine — all with the precision and flair of a professional. Whether you’re routing, carving, cutting, or jointing, this exceptional machine can produce original masterpieces right in your very own workshop.

Just Think of it as Desktop Publishing for Wood and Other Soft Materials
The CarveWright woodworking system is as easy as 1-2-3. First, simply design your project with the included CarveWright designer software. Next, upload your project to the memory card, but don’t limit yourself; the included card is capable of holding several projects at once. Finally, insert the memory card into the woodcarving machine — and the easy-to-follow LCD will guide you through the rest.

The Software
Thanks to CarveWright’s intuitive, straightforward software package, you don’t need to be a master craftsman to make customized creations. The point-and-click interface is super simple to navigate, but surprisingly powerful. With this software, you can arrange, combine, and even alter elements from the existing 3D image library with the tap of a mouse — or import your own images into the library for a unique and custom product. Images can then be “dragged and dropped” onto the workpiece display, where it’s easy to combine images, add text, change size and re-shape, or adjust the carving depth.

With CarveWright design software, you can contour the surface of your workpiece by trimming it into domes or arcs, or applying a variety of textures. You can even draw out your own design using the integrated 2D drawing capabilities. The 2D elements operate much like CAD software, letting you create and then apply constraints to lines and curves. And if you’re interested in making signs, you’re in luck — because this software has extensive text capabilities. Raster text for a bold 3D effect, outline it for emphasis, or quickly carve text with a V-bit for an engraved look. The software uses the true type fonts which are already available on your computer, so unique, one-of-a-kind signs are a snap.

The CarveWright design software is both PC and Mac compatible, and it operates without ever requiring your computer to be hooked up to the CarveWright woodcarving machine. You can click here to see a demonstration of CarveWright software, and watch the system in action.

The woodcarving machine automatically selects the appropriate bit for the task at hand.

Use the machine to create ornate boxes for gifts or display.

Design and craft your own custom furniture to meet your personal tastes and style.

Enhance your home’s value and appeal with exquisite architectural detailing.

The Machine
The CarveWright Woodcarving Machine measures a mere 15 by 18 by 26 inches so it’s compact and easy to store, but it’s loaded with the power and convenience features of an entire workshop. The rising-head and feed-through configuration accepts workpieces up to 14-1/2 inches wide and 5 inches high — and with proper support, it will process stock of nearly any desired length.

The onboard computer makes this machine amazingly quick and trouble-free to use. Just load the designs you’ve saved onto the memory card, and the LCD screen will walk you through the set-up. Now you’re ready to create complex carvings, signs, reliefs for mantles and cabinetry, or friezes and furniture. The machine will automatically choose the correct bit for your job and measure your workpiece; and the patented Quick Change System makes removing and replacing the bits perfectly painless.

The machine features a vacuum impeller built-in as well as an external vacuum port that fits a 2-1/4-inch OD hose. This vacuum system maintains airflow through the machine and removes airborne dust that can build up on the sensors, but it is not designed to remove all of the generated chips and dust. Most of the dust generated by the CarveWright remains confined within the machine and will not affect the machine performance. After every project, simply vacuum or treat the area with compressed air.

Like a printer, projects can be configured to run in a draft mode (low quality), normal quality, or best quality depending on the situation. The quality mode dictates the speed of the cut and amount of material removed per pass. On the best quality setting, the spacing between passes is .006-inch.

This advanced machine works well in most soft materials including wood — even exotic hardwoods. The machine will also cut some foams, and suitable plastics, including polycarbonate or cast acrylic. With this machine, the sky’s the limit. If you can dream it up, the CarveWright can bring it to life. Click here to see some fun examples of products from CarveWright workshops around the country.

Key Technical Specs for the CarveWright Woodcarving Machine:

• Machine runs only on 60 Hz 110V AC
• Minimum workpiece size: 1-1/2-inch wide by 1/2-inch tall by 7 inches long
• Maximum workpiece size: 14-1/2 inches wide by 5 inches tall by approximately 12 feet long (limited by weight)
• Cut motor horsepower (peak): 1 horsepower
• Cut motor speed (no load): 20,000 rpm

Optional Accessories (Not Included with This Purchase)
If you’d like to expand your woodcarving machine’s already considerable application set, CarveWright offers a full line of expansion products including bit sets, software upgrades, and The Probe. The Probe opens up the world of 3D scanning to anyone with a CarveWright woodcarving machine. With this amazing device, you can reproduce original pieces, repair antique furniture, and even copy trim and moldings with ease. Almost any material can be scanned — even soft materials such as clay or wax. Just plug The Probe into the CarveWright, set the desired scan area, and watch the CarveWright go to work.

Warranty
The CarveWright warranty covers parts and labor for one full year or 200 hours of cutting. The warranty excludes consumable items such as bits, sandpaper drive belts, and flexshafts. The machine tracks cutting time for this purpose. Shipping costs are not covered under the warranty, and the service center is located in Houston, TX. There is a 30-day return period after which no returns are accepted. There is also a restocking fee for returned machines. The warranty does not cover commercial or industrial use.

What’s in the box:
The CarveWright Woodworking System comes equipped with everything you need to get started, right out of the box. Included with your purchase is the woodcarving machine, one carving bit, one cutting bit, two 1/4-inch bit adapters, vacuum-bag, a bit removal tool, a CarveWright memory card with programmer, the CarveWright design software, and the user’s manual.

Check Price Now!

*** Product Information and Prices Stored: Aug 19, 2011 19:47:08

36D Titanium Coated Carbide Bur – 3/32″ Shank – Round Ball Shaped Carbide Review

36D Titanium Coated Carbide Bur – 3/32″ Shank – Round Ball Shaped Carbide Feature

• Round Ball Shaped Carbide Bur – Head diameter approx. 3/32″
• Titanium Nitride Coated Solid Carbide Bur – 3/32″ Shank
• Cuts faster and lasts longer than standard carbide burs
• Leaves a smoother finish than conventional carbide burs
• Great for carving and shaping wood, metal, ivory, bone, amber, resin and more

36D Titanium Coated Carbide Bur – 3/32″ Shank – Round Ball Shaped Carbide Overview

Lasco’s special titanium nitride coating causes these burs to cut faster, last longer, and leave a smoother finish than regular carbide burs. The titanium coating also provides a superior finish and helps reduce friction. They are great for carving and shaping wood, metal, ivory, bone, amber, resin, and more… These burs are designed to be run up to 50,000 RPM.

Check Price Now!

*** Product Information and Prices Stored: Aug 18, 2011 19:40:07

CL95 – 40 Grit Diamond Bur (Made In USA) Review

CL95 – 40 Grit Diamond Bur (Made In USA) Feature

• Cylinder Shaped Diamond Coated Tool
• Great for carving stone, wood, and more
• 100% Natural Diamond (Not Synthetic) – 40 Grit
• U.S. Made – High Quality – Fast Cutting
• Concentricity Guaranteed

CL95 – 40 Grit Diamond Bur (Made In USA) Overview

The CL95 – 40 Grit Diamond Bur is great for cutting, grinding, or carving stone, wood, tile, metal, and more. 1/8″ Shank. Cutting Head is approximately 18mm in length and 7mm in diameter.

The CL95 is available in 40, 80, 150, 200, 400, and 600 Grit

Check Price Now!

*** Product Information and Prices Stored: Aug 17, 2011 18:09:05

Rockler CNC Shark Routing System, with New 5.5 Software Review

Rockler CNC Shark Routing System, with New 5.5 Software Feature

• Travel: X: 24” Y: 13” Z: 4.5”.
• Compatible with the Bosch Colt Palm Router.
• Table measures 15-3/4” x 31-1/2”
• 12 precision linear bearing guides (4 on each axis) for maximum rigidity.
• VCarve Pro 3.1 program included (0 value).

Rockler CNC Shark Routing System, with New 5.5 Software Overview

Bring the speed and precision of computer-controlled machinery to your shop with this top value CNC system! With a table measuring 15-3/4″ x 31-1/2″ it’s ideally suited for carvings and machining operations on a large variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene construction, it can take accidental impacts that would normally damage or destroy an aluminum or MDF machine.

The included Clamping Table features two hold-down slots for securing work anywhere along the length of the table. The unit comes with two hold-down clamps (additional hold-downs are available separately). It is fully compatible with the Bosch Colt Palm Router and includes a 1/2″ diameter V-groove router bit. The CNC Shark also includes the new version 6.0 of the VCarve Pro software interface a 0 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the USB cable to the controller box and the other end to your computer (not compatible with Mac computers).

Made in the U.S.A.
Please note: This item can only be shipped within the 48 Continental United States and Canada.

Check Price Now!

*** Product Information and Prices Stored: Aug 16, 2011 17:54:04

DOME – 80 Grit Diamond Bur (Made In USA) – 1/8″ Shank Review

DOME – 80 Grit Diamond Bur (Made In USA) – 1/8″ Shank Feature

• 13mm Approximate Head Length, 20mm Approximate Head Diameter, 1/8″ Shank
• 80 Grit 100% Natural Diamond (Not Synthetic)
• Great for grinding or carving all types of stone, glass, tile, ceramic, wood, and more
• Great for making marble or other stone sculptures
• U.S. Made – High Quality – Durable

DOME – 80 Grit Diamond Bur (Made In USA) – 1/8″ Shank Overview

The 80 Grit Dome (photo shown is 150 Grit) is great for grinding or carving all types of stone, glass, tile, wood and more… It works especially well for creating marble or stone sculptures. The 80 Grit is intended to be used for rough cutting. As with all Lasco Diamond Burs, the 80 Grit Dome is high quality, durable, 100% Natural Diamond bur, and is made in the USA. The Dome is also availble in 40 Grit, 80 Grit, 150 Grit, 200 Grit, 400 Grit, and 600 Grit.

Check Price Now!

*** Product Information and Prices Stored: Aug 15, 2011 17:11:06

T100 – 80 Grit Diamond Bur – 3/32″ Shank (Made In USA) Review

T100 – 80 Grit Diamond Bur – 3/32″ Shank (Made In USA) Feature

• Flat End Taper – Approx Dimension: 10mm Head Length, Diameter 2.7mm (Base), 1.8mm (Tip), 3/32″ Shank
• 80 Grit 100% Natural Diamond (Not Synthetic), U.S. Made – High Quality – Durable
• Great for grinding or carving all types of stone, glass, tile, wood, and more
• Great for making marble or other stone sculptures and carvings.
• Works best for bulk removal and rough cutting

T100 – 80 Grit Diamond Bur – 3/32″ Shank (Made In USA) Overview

The 80 Grit T100 (photo shown is 150 Grit) is a tapered diamond bur with a flat end. The approximate head length is 10mm, the approximate head diameter at the base is 2.7mm, and the approximate head diameter at the tip is 1.8mm. This bur is great for grinding or carving all types of stone, glass, tile, wood and more… It works especially well for creating small carvings. This shape works especially well for blending areas on a carving or free form. The 80 Grit is intended to be used for bulk removal and rough cutting. As with all Lasco Diamond Burs, the 80 Grit T100 is a high quality, durable, 100% Natural Diamond bur, and is made in the USA. The T100 is also available in 80 Grit, 150 Grit, 200 Grit, 400 Grit, and 600 Grit.

Check Price Now!

*** Product Information and Prices Stored: Aug 14, 2011 17:08:07

73C Titanium Coated Carbide Bur – 3/32″ Shank – Inverted Cone Shaped Review

73C Titanium Coated Carbide Bur – 3/32″ Shank – Inverted Cone Shaped Feature

• Inverted Cone Shaped Carbide Bur
• Titanium Nitride Coated Solid Carbide Bur – 3/32″ Shank
• Cuts faster and lasts longer than standard carbide burs
• Leaves a smoother finish than conventional carbide burs
• Great for carving and shaping wood, metal, ivory, bone, amber, resin and more

73C Titanium Coated Carbide Bur – 3/32″ Shank – Inverted Cone Shaped Overview

Lasco’s special titanium nitride coating causes these burs to cut faster, last longer, and leave a smoother finish than regular carbide burs. The titanium coating also provides a superior finish and helps reduce friction. They are great for carving and shaping wood, metal, ivory, bone, amber, resin, and more… These burs are designed to be run up to 50,000 RPM.

Check Price Now!

*** Product Information and Prices Stored: Aug 13, 2011 16:44:07

28 pc. Woodburning Set Review

28 pc. Woodburning Set Feature

• Hot Carving More artistic than using a router, and much, much less work than carving with chisels: wood-burning is back. Expand your skills with your wood-burning pen by adding a set of nibs for the pen that includes a hot plastic and foam cutter, (10) soldering tips, (15) varied wood-burning nibs in assorted shapes and points, and both number and alphabet stencils. Woodburning pen not included. Tips only.

28 pc. Woodburning Set Overview

Hot Carving More artistic than using a router, and much, much less work than carving with chisels: wood-burning is back. Expand your skills with your wood-burning pen by adding a set of nibs for the pen that includes a hot plastic and foam cutter, (10) soldering tips, (15) varied wood-burning nibs in assorted shapes and points, and both number and alphabet stencils. Woodburning pen not included. Tips only.

Check Price Now!

*** Product Information and Prices Stored: Aug 12, 2011 16:21:13